LAUNCH CR3001 OBD2 Scanner Full OBD2 Functions Code Reader Auto Diagnostic Tool
LAUNCH CR3001 OBD2 Scanner Full OBD2 Functions Code Reader Auto Diagnostic Tool
LAUNCH CR3001 OBD2 Scanner Full OBD2 Functions Code Reader Auto Diagnostic Tool
Product Overview
LAUNCH CR3001 OBD2 Scanner Code Reader Auto Diagnostic Tool Full OBD2 Functions
Note:
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
[ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
[ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
[ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
[ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal !
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
4.The Scanner doesn't need to charge. You just need to connect to your car OBD2 port.
[ Read and Clear Codes ] : LAUNCH Creader 3001 obd2 scanner read and clear fault codes for engine system. In addition, Creader 3001 built in fault codes definition lookup library. LAUNCH Creader 3001 obd2 scanner works on most 1996 and newer US-based vehicles that are OBDII compliant (OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). "PLUG AND PLAY" scan tool, equipped with a 2. 5 feet long cable and made of a very thick flexible insulator, very easy to use for beginners.
[ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
[ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
[ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
[ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal !
Why Choose Launch 3001?
Launch 3001 is one obd2 full function scan tool, support over 10000+ car models, simple but usuful obd2 scanner!
1.What is different between launch 3001 code reader and AD310 code reader?
They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test, Evap system test, On-Board monitor test.
2.What is different between launch 3001 obd2 scanner and AL319 scan tool?
They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test
3.Launch 3001 is obd2 scanner for engine system with full test of obd2.
Read Codes, Erase Codes, I/M Readiness, Data Stream View, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, DTC Lookup.
Read/Erase Codes: LAUNCH Creader 3001 car diagnostic scanner can show the detailed description of the Diagnostic Trouble Code (DTCs) and turns off Check Engine Light (MIL), clears codes and resets monitors.
Live Data: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. It's a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
Component Test (EVAP Test): Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
Read Vehicle Information (VIN): Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
4.Launch 3001 support 7 lanuages: English, French, German, Spanish, Russian, Italian, Polish.
What are the LAUNCH Creader 3001 OBD2 Scanner highlights?
1. TURN OFF “Check Engine Light”
2.Read I/M Readiness Status
3. View Freeze Frame
4. View Data Stream
5.O2 Sensor Test
6.EVAP System test
7.0ON-BOARD Monitor test
8.Read& Clear DTCs
9.Identify VIN Information
10. DTC Lookup Library
What we did upgrade on LAUNCH Creader 3001 OBD2 scanner on 2020 to make it more perfect?
Add more car models, Fixed more bugs and upgrade car models up to 2020 new models, including cars, SUVs,minivans,light-duty trucks all over the world. But the year supported may vary on different car makes and models.
Compared with the old version, LAUNCH Creader 3001 OBD2 scanner can be upgraded and it's lifetime free update.
How to update LAUNCH Creader 3001 car code reader?
Connect the scanner with PC by USB cable.
Download update software from official website on computer.
Click the "Creader Series Setup.exe" and follow the message to install the client software on computer.
Hit "Product Update Tool Setup" to update.
Vehicle Models Coverage:
LAUNCH Creader 3001 code reader compatible with OBDII protocol, support work on Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daweoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu,Jeep Ford, EU-Ford, GM, Chrysler, Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter,Chrysler,etc. It supports protocols including KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). (Note: Not compatible with Hybrid & Electric vehicles)
Packing List:
1pcs*LAUNCH CR3001
1pcs*USB Cable
1pcs*English manual
On Apr 18, 2024 at 01:44:51 PDT, seller added the following information:
| Brand: | LAUNCH |
|---|---|
| Isin: | IWOL7DF99FZB |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
Product Overview
LAUNCH CR3001 OBD2 Scanner Code Reader Auto Diagnostic Tool Full OBD2 Functions
Note:
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
[ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
[ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
[ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
[ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal !
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
4.The Scanner doesn't need to charge. You just need to connect to your car OBD2 port.
[ Read and Clear Codes ] : LAUNCH Creader 3001 obd2 scanner read and clear fault codes for engine system. In addition, Creader 3001 built in fault codes definition lookup library. LAUNCH Creader 3001 obd2 scanner works on most 1996 and newer US-based vehicles that are OBDII compliant (OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). "PLUG AND PLAY" scan tool, equipped with a 2. 5 feet long cable and made of a very thick flexible insulator, very easy to use for beginners.
[ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
[ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
[ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
[ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal !
Why Choose Launch 3001?
Launch 3001 is one obd2 full function scan tool, support over 10000+ car models, simple but usuful obd2 scanner!
1.What is different between launch 3001 code reader and AD310 code reader?
They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test, Evap system test, On-Board monitor test.
2.What is different between launch 3001 obd2 scanner and AL319 scan tool?
They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test
3.Launch 3001 is obd2 scanner for engine system with full test of obd2.
Read Codes, Erase Codes, I/M Readiness, Data Stream View, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, DTC Lookup.
Read/Erase Codes: LAUNCH Creader 3001 car diagnostic scanner can show the detailed description of the Diagnostic Trouble Code (DTCs) and turns off Check Engine Light (MIL), clears codes and resets monitors.
Live Data: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. It's a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
Component Test (EVAP Test): Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
Read Vehicle Information (VIN): Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
4.Launch 3001 support 7 lanuages: English, French, German, Spanish, Russian, Italian, Polish.
What are the LAUNCH Creader 3001 OBD2 Scanner highlights?
1. TURN OFF “Check Engine Light”
2.Read I/M Readiness Status
3. View Freeze Frame
4. View Data Stream
5.O2 Sensor Test
6.EVAP System test
7.0ON-BOARD Monitor test
8.Read& Clear DTCs
9.Identify VIN Information
10. DTC Lookup Library
What we did upgrade on LAUNCH Creader 3001 OBD2 scanner on 2020 to make it more perfect?
Add more car models, Fixed more bugs and upgrade car models up to 2020 new models, including cars, SUVs,minivans,light-duty trucks all over the world. But the year supported may vary on different car makes and models.
Compared with the old version, LAUNCH Creader 3001 OBD2 scanner can be upgraded and it's lifetime free update.
How to update LAUNCH Creader 3001 car code reader?
Connect the scanner with PC by USB cable.
Download update software from official website on computer.
Click the "Creader Series Setup.exe" and follow the message to install the client software on computer.
Hit "Product Update Tool Setup" to update.
Vehicle Models Coverage:
LAUNCH Creader 3001 code reader compatible with OBDII protocol, support work on Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daweoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu,Jeep Ford, EU-Ford, GM, Chrysler, Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter,Chrysler,etc. It supports protocols including KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). (Note: Not compatible with Hybrid & Electric vehicles)
Packing List:
1pcs*LAUNCH CR3001
1pcs*USB Cable
1pcs*English manual
On Apr 18, 2024 at 01:44:51 PDT, seller added the following information:
| Brand: | LAUNCH |
|---|---|
| Isin: | IWOL7DF99FZB |
LAUNCH CR3001 OBD2 Scanner Code Reader Auto Diagnostic Tool Full OBD2 Functions
Note:
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
[ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
[ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
[ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
[ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal !
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
4.The Scanner doesn't need to charge. You just need to connect to your car OBD2 port.
[ Read and Clear Codes ] : LAUNCH Creader 3001 obd2 scanner read and clear fault codes for engine system. In addition, Creader 3001 built in fault codes definition lookup library. LAUNCH Creader 3001 obd2 scanner works on most 1996 and newer US-based vehicles that are OBDII compliant (OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). "PLUG AND PLAY" scan tool, equipped with a 2. 5 feet long cable and made of a very thick flexible insulator, very easy to use for beginners.
[ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets.
[ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number.
[ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic.
[ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal !
Why Choose Launch 3001?
Launch 3001 is one obd2 full function scan tool, support over 10000+ car models, simple but usuful obd2 scanner!
1.What is different between launch 3001 code reader and AD310 code reader?
They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test, Evap system test, On-Board monitor test.
2.What is different between launch 3001 obd2 scanner and AL319 scan tool?
They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test
3.Launch 3001 is obd2 scanner for engine system with full test of obd2.
Read Codes, Erase Codes, I/M Readiness, Data Stream View, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, DTC Lookup.
Read/Erase Codes: LAUNCH Creader 3001 car diagnostic scanner can show the detailed description of the Diagnostic Trouble Code (DTCs) and turns off Check Engine Light (MIL), clears codes and resets monitors.
Live Data: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. It's a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
Component Test (EVAP Test): Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
Read Vehicle Information (VIN): Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
4.Launch 3001 support 7 lanuages: English, French, German, Spanish, Russian, Italian, Polish.
What are the LAUNCH Creader 3001 OBD2 Scanner highlights?
1. TURN OFF “Check Engine Light”
2.Read I/M Readiness Status
3. View Freeze Frame
4. View Data Stream
5.O2 Sensor Test
6.EVAP System test
7.0ON-BOARD Monitor test
8.Read& Clear DTCs
9.Identify VIN Information
10. DTC Lookup Library
What we did upgrade on LAUNCH Creader 3001 OBD2 scanner on 2020 to make it more perfect?
Add more car models, Fixed more bugs and upgrade car models up to 2020 new models, including cars, SUVs,minivans,light-duty trucks all over the world. But the year supported may vary on different car makes and models.
Compared with the old version, LAUNCH Creader 3001 OBD2 scanner can be upgraded and it's lifetime free update.
How to update LAUNCH Creader 3001 car code reader?
Connect the scanner with PC by USB cable.
Download update software from official website on computer.
Click the "Creader Series Setup.exe" and follow the message to install the client software on computer.
Hit "Product Update Tool Setup" to update.
Vehicle Models Coverage:
LAUNCH Creader 3001 code reader compatible with OBDII protocol, support work on Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daweoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu,Jeep Ford, EU-Ford, GM, Chrysler, Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter,Chrysler,etc. It supports protocols including KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). (Note: Not compatible with Hybrid & Electric vehicles)
Packing List:
1pcs*LAUNCH CR3001
1pcs*USB Cable
1pcs*English manual
On Apr 18, 2024 at 01:44:51 PDT, seller added the following information:
Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...
UPC
753215881581
Type
Erase Fault Code Car Diagnostic Tool
Material
100% Original and Premium
Color
Black
Similar Models
CR319,AD310,AD410,AL319,NT301,YA101
Model
LAUNCH Creader 3001
Brand
LAUNCH
Manufacturer Part Number
ELM327 LAUNCH CR319 CR3001 AL319 AS200
OBD Interface
EOBD, OBDII
Supported System
Engine
Connectivity
OBD2 Cable
Vehicle Type
Passenger Vehicle
Accessories
Carrying Case, USB Cable, User Guide
Features
Check Engine Light Shut Off, Color Display, DTC Lookup Library, EVAP Test, Erases Codes, Freeze Frame Displays, I/M readiness, Internet Updateable, Live Data Stream, Multi-Language Interface, O2 Sensor Test, On-Board Monitor, User Friendly, Vehicle Information
Warranty
Lifetime
Country/Region of Manufacture
China
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.