Skip to main content

Modigt 4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insulation pad

Brand: Modigt
  • Package Included:
  • 4sheets 12" X 12" Sponge Foam Sheet
  •  
  • Item Description:
  • Material: High Density Foam Cotton
  • Item Length:30 CM = 12" Item Width:30 CM = 12" Item Thickness:2 CM =  20 MM = 0.8 INCH = 787 MIL = 4/5" Size:4Sheets 12" x 12" (Total 0.36sqm/3.9sqft) Reinforced / Crush Resistant: Yes Mildew & Mold Resistant: Yes Water resistant: Yes Non-toxic: Yes
  •  
  • Features:
  • ⭐【PRODUCT FEATURES】
  • The closed-cell neoprene rubber roll is insulated, anti-slip, damp-proof, soundproof, buffering, corrosion-resistant, shock-absorbing, non-toxic, durable and environmentally friendly
  •  
  • 4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insulation pad

    Package Included:

    4sheets 12" X 12" Sponge Foam Sheet

     

    Item Description:

    Material: High Density Foam Cotton

    Item Length:30 CM = 12"
    Item Width:
    30 CM = 12"
    Item Thickness:2 CM =  20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size:4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)

    Reinforced / Crush Resistant: Yes
    Mildew & Mold Resistant: Yes
    Water resistant: Yes
    Non-toxic: Yes

     

    Features:

    ⭐【PRODUCT FEATURES】

    The closed-cell neoprene rubber roll is insulated, anti-slip, damp-proof, soundproof, buffering, corrosion-resistant, shock-absorbing, non-toxic, durable and environmentally friendly

     

    ⭐【Waterproof & Non-absorbent】
    Non-Absorbent, resistance to most oils, solvents, and fuels. Made odf EPDM sponge foam, this material is specifically made and designed to repel liquids and odors.     Perfect for high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【Temperature Range】
    The temperature range is from -30° to 195° F

     

    ⭐【Soft EVA Foam】
    Closed cell foam sheet is perfect for use as sound deadening in vehicles, and works well when used to dampen vibrations in recording studio monitors and subwoofer boxes.

     

    ⭐【Cushioning & Sealing】
    Closed foam padding is made of EPDM, this material is specifically made and designed to cushioning,sealing,shock absorption,sound insulation,sound reduction and noise reduction,which can be used in high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【STRONG ADHESIVE】
    The high-density rubber strip is covered with strong adhesive backing and it is non-degumming, so the rubber sheet can stick firmly for a long time and leave no residue when it is to be removed

     

    ⭐【Multipurpose】
    The DIY projects sheet is an all-around foam sheets padding and sealing tool that can be used on weather stripping doors, gaskets and pipes.  Can be applied to cabins, decks, cars, etc for anti-slip and waterproof use;can be applied to floors, furniture for protection,it can also be used for clothing, role playing and decorationIt.Is also easy to work with and can be conformed to any size and shape with the use of a pair of scissors or cutter, making it a great tool for cosplays,padding, props, costumes and craft tool.


    ⭐【EASY TO USE】
    Please clean and dry the flat surface you need to stick to before sticking. Cut the closed cell foam sheet into the size or shape you need, then peel off the release paper to stick.

     

    Notice:
    1.Our foam sheet has no chemical smell.Production process and sealed packaging inevitably produce some slight odor.This is a normal phenomenon.
    2.This smell will gradually disappear.Please rest assured that the material is no harm to your health.
    3.Before peeling off the back paper,you had better use a hair dryer to blow the foam pad for a while so that the it can be peeld off more easily.

    4.If you have any questions or concerns, please contact us using the EBAY messaging system.Thanks! 


    Item Specifics
    Brand :Modigt
    Type :Carpet Mat, Heat Sound Deadener Insulation Mat
    Material :High Density Foam Cotton
    Placement on Vehicle :Left, Right, Front, Rear
    Item Length :12 inch = 30 cm
    Item Width :12 inch = 30 cm
    Item Thickness :2 CM = 20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size :4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)
    Attachment Type :Self-Adhesive
    Typical Temperature Stability :-30° to 195° F
    Features 1 :Insulated,anti-slip,Waterproof & Non-absorbent
    Features 2 :soundproof, buffering, corrosion-resistant,
    Features 3 :significantly reducing heat loss,shock-absorbing, non-toxic,
    Features 4 :Easy Installation,Easy to cut,durable
    Features 5 :Good tear and abrasion resistance
    Application 1 :Van,Truck, windows, furniture, electrical cabinets,
    Application 2 :doors, speakers, toys, sports equipment
    Application 3 :limousine,Camper,Boat,Motor Homes,School Bus,Low Rider
    Using Placement 1 :Hood , Celling , Door
    Using Placement 2 :Cockpit Floor, Tailgate, Firewall U Type Wall
    Using Placement 3 :Front Fender, Front and Back Wheels
    Using Placement 4 :Cargo,Trunk,Bonnet,Dashboard,Under Seat
    Using Placement 5 :Trunk Lid,Trunk Room,Engines
    Using Placement 6 :Underneath bonnets,Underfelt,Underlay
    Fitment Type :Direct Replacement
    Manufacturer Warranty :2 Years

    Payment

    1. It will be much appreciated that you finish your payment asap or it will make UPI(unpaid item case) on your account leading to be suspended or restricted by eBay when those UPI cases carry over to certain amount.

    2. Any problems please contact us for more details.

    Shipping

    We do appreciate your purchase here. If you are astisfied with the item as well as our service, please kindly leave us a Positive Feedback to help develop our business. Thank you in advance.

    Returns

    1. All items will be shipped to buyer's ebay address.

    2. All items will be shipped within 24 working hours upon receipt of payment, and multiple items will be combined shipping.

    3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.

    Contact Us

    1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your Ebay message as soon as possible, please kindly allow 24 hours for us to response.

    2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please contact us before leaving any 1 or 2 star ratings, negative feedback or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.

    . ]

    DESCRIPTION
    PAYMENT
    SHIPPING
    RETURN POLICY
    CONTACT US
    4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insulation pad

    Package Included:

    4sheets 12" X 12" Sponge Foam Sheet

     

    Item Description:

    Material: High Density Foam Cotton

    Item Length:30 CM = 12"
    Item Width:
    30 CM = 12"
    Item Thickness:2 CM =  20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size:4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)

    Reinforced / Crush Resistant: Yes
    Mildew & Mold Resistant: Yes
    Water resistant: Yes
    Non-toxic: Yes

     

    Features:

    ⭐【PRODUCT FEATURES】

    The closed-cell neoprene rubber roll is insulated, anti-slip, damp-proof, soundproof, buffering, corrosion-resistant, shock-absorbing, non-toxic, durable and environmentally friendly

     

    ⭐【Waterproof & Non-absorbent】
    Non-Absorbent, resistance to most oils, solvents, and fuels. Made odf EPDM sponge foam, this material is specifically made and designed to repel liquids and odors.     Perfect for high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【Temperature Range】
    The temperature range is from -30° to 195° F

     

    ⭐【Soft EVA Foam】
    Closed cell foam sheet is perfect for use as sound deadening in vehicles, and works well when used to dampen vibrations in recording studio monitors and subwoofer boxes.

     

    ⭐【Cushioning & Sealing】
    Closed foam padding is made of EPDM, this material is specifically made and designed to cushioning,sealing,shock absorption,sound insulation,sound reduction and noise reduction,which can be used in high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【STRONG ADHESIVE】
    The high-density rubber strip is covered with strong adhesive backing and it is non-degumming, so the rubber sheet can stick firmly for a long time and leave no residue when it is to be removed

     

    ⭐【Multipurpose】
    The DIY projects sheet is an all-around foam sheets padding and sealing tool that can be used on weather stripping doors, gaskets and pipes.  Can be applied to cabins, decks, cars, etc for anti-slip and waterproof use;can be applied to floors, furniture for protection,it can also be used for clothing, role playing and decorationIt.Is also easy to work with and can be conformed to any size and shape with the use of a pair of scissors or cutter, making it a great tool for cosplays,padding, props, costumes and craft tool.


    ⭐【EASY TO USE】
    Please clean and dry the flat surface you need to stick to before sticking. Cut the closed cell foam sheet into the size or shape you need, then peel off the release paper to stick.

     

    Notice:
    1.Our foam sheet has no chemical smell.Production process and sealed packaging inevitably produce some slight odor.This is a normal phenomenon.
    2.This smell will gradually disappear.Please rest assured that the material is no harm to your health.
    3.Before peeling off the back paper,you had better use a hair dryer to blow the foam pad for a while so that the it can be peeld off more easily.

    4.If you have any questions or concerns, please contact us using the EBAY messaging system.Thanks! 

    Item Specifics
    Brand :Modigt
    Type :Carpet Mat, Heat Sound Deadener Insulation Mat
    Material :High Density Foam Cotton
    Placement on Vehicle :Left, Right, Front, Rear
    Item Length :12 inch = 30 cm
    Item Width :12 inch = 30 cm
    Item Thickness :2 CM = 20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size :4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)
    Attachment Type :Self-Adhesive
    Typical Temperature Stability :-30° to 195° F
    Features 1 :Insulated,anti-slip,Waterproof & Non-absorbent
    Features 2 :soundproof, buffering, corrosion-resistant,
    Features 3 :significantly reducing heat loss,shock-absorbing, non-toxic,
    Features 4 :Easy Installation,Easy to cut,durable
    Features 5 :Good tear and abrasion resistance
    Application 1 :Van,Truck, windows, furniture, electrical cabinets,
    Application 2 :doors, speakers, toys, sports equipment
    Application 3 :limousine,Camper,Boat,Motor Homes,School Bus,Low Rider
    Using Placement 1 :Hood , Celling , Door
    Using Placement 2 :Cockpit Floor, Tailgate, Firewall U Type Wall
    Using Placement 3 :Front Fender, Front and Back Wheels
    Using Placement 4 :Cargo,Trunk,Bonnet,Dashboard,Under Seat
    Using Placement 5 :Trunk Lid,Trunk Room,Engines
    Using Placement 6 :Underneath bonnets,Underfelt,Underlay
    Fitment Type :Direct Replacement
    Manufacturer Warranty :2 Years

    Payment

    1. It will be much appreciated that you finish your payment asap or it will make UPI(unpaid item case) on your account leading to be suspended or restricted by eBay when those UPI cases carry over to certain amount.

    2. Any problems please contact us for more details.

    Shipping

    We do appreciate your purchase here. If you are astisfied with the item as well as our service, please kindly leave us a Positive Feedback to help develop our business. Thank you in advance.

    Returns

    1. All items will be shipped to buyer's ebay address.

    2. All items will be shipped within 24 working hours upon receipt of payment, and multiple items will be combined shipping.

    3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.

    Contact Us

    1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your Ebay message as soon as possible, please kindly allow 24 hours for us to response.

    2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please contact us before leaving any 1 or 2 star ratings, negative feedback or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.

    . ]


    All right reserved.







    Brand: Modigt
    Isin: I20NILT95FWA

    $32.67

    • Free shipping in US
    • Arrives:

    • Free 30-Day returns

    In Stock

    Sold by , Fulfilled by IBSPOT
    Ships from USA

    IBspot Buyer Protection

    Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

    supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

    GUARANTEED SAFE CHECKOUT

    More seller options

    Starting from

    Compare all sellers
    • MONEY BACK GUARANTEE

      30 days money back guarantee, no additional fee charged.

    • EXCELLENT SUPPORT

      We provide 24/7 online customer support via email.

    • Fast Shipping

      One week domestic shipping. Global delivery to the US in 2 weeks.

    scroll to top arrow
    Modigt 4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insulation pad

    Modigt 4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insu...

    $32.67

  • Package Included:
  • 4sheets 12" X 12" Sponge Foam Sheet
  •  
  • Item Description:
  • Material: High Density Foam Cotton
  • Item Length:30 CM = 12" Item Width:30 CM = 12" Item Thickness:2 CM =  20 MM = 0.8 INCH = 787 MIL = 4/5" Size:4Sheets 12" x 12" (Total 0.36sqm/3.9sqft) Reinforced / Crush Resistant: Yes Mildew & Mold Resistant: Yes Water resistant: Yes Non-toxic: Yes
  •  
  • Features:
  • ⭐【PRODUCT FEATURES】
  • The closed-cell neoprene rubber roll is insulated, anti-slip, damp-proof, soundproof, buffering, corrosion-resistant, shock-absorbing, non-toxic, durable and environmentally friendly
  •  
  • 4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insulation pad

    Package Included:

    4sheets 12" X 12" Sponge Foam Sheet

     

    Item Description:

    Material: High Density Foam Cotton

    Item Length:30 CM = 12"
    Item Width:
    30 CM = 12"
    Item Thickness:2 CM =  20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size:4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)

    Reinforced / Crush Resistant: Yes
    Mildew & Mold Resistant: Yes
    Water resistant: Yes
    Non-toxic: Yes

     

    Features:

    ⭐【PRODUCT FEATURES】

    The closed-cell neoprene rubber roll is insulated, anti-slip, damp-proof, soundproof, buffering, corrosion-resistant, shock-absorbing, non-toxic, durable and environmentally friendly

     

    ⭐【Waterproof & Non-absorbent】
    Non-Absorbent, resistance to most oils, solvents, and fuels. Made odf EPDM sponge foam, this material is specifically made and designed to repel liquids and odors.     Perfect for high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【Temperature Range】
    The temperature range is from -30° to 195° F

     

    ⭐【Soft EVA Foam】
    Closed cell foam sheet is perfect for use as sound deadening in vehicles, and works well when used to dampen vibrations in recording studio monitors and subwoofer boxes.

     

    ⭐【Cushioning & Sealing】
    Closed foam padding is made of EPDM, this material is specifically made and designed to cushioning,sealing,shock absorption,sound insulation,sound reduction and noise reduction,which can be used in high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【STRONG ADHESIVE】
    The high-density rubber strip is covered with strong adhesive backing and it is non-degumming, so the rubber sheet can stick firmly for a long time and leave no residue when it is to be removed

     

    ⭐【Multipurpose】
    The DIY projects sheet is an all-around foam sheets padding and sealing tool that can be used on weather stripping doors, gaskets and pipes.  Can be applied to cabins, decks, cars, etc for anti-slip and waterproof use;can be applied to floors, furniture for protection,it can also be used for clothing, role playing and decorationIt.Is also easy to work with and can be conformed to any size and shape with the use of a pair of scissors or cutter, making it a great tool for cosplays,padding, props, costumes and craft tool.


    ⭐【EASY TO USE】
    Please clean and dry the flat surface you need to stick to before sticking. Cut the closed cell foam sheet into the size or shape you need, then peel off the release paper to stick.

     

    Notice:
    1.Our foam sheet has no chemical smell.Production process and sealed packaging inevitably produce some slight odor.This is a normal phenomenon.
    2.This smell will gradually disappear.Please rest assured that the material is no harm to your health.
    3.Before peeling off the back paper,you had better use a hair dryer to blow the foam pad for a while so that the it can be peeld off more easily.

    4.If you have any questions or concerns, please contact us using the EBAY messaging system.Thanks! 


    Item Specifics
    Brand :Modigt
    Type :Carpet Mat, Heat Sound Deadener Insulation Mat
    Material :High Density Foam Cotton
    Placement on Vehicle :Left, Right, Front, Rear
    Item Length :12 inch = 30 cm
    Item Width :12 inch = 30 cm
    Item Thickness :2 CM = 20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size :4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)
    Attachment Type :Self-Adhesive
    Typical Temperature Stability :-30° to 195° F
    Features 1 :Insulated,anti-slip,Waterproof & Non-absorbent
    Features 2 :soundproof, buffering, corrosion-resistant,
    Features 3 :significantly reducing heat loss,shock-absorbing, non-toxic,
    Features 4 :Easy Installation,Easy to cut,durable
    Features 5 :Good tear and abrasion resistance
    Application 1 :Van,Truck, windows, furniture, electrical cabinets,
    Application 2 :doors, speakers, toys, sports equipment
    Application 3 :limousine,Camper,Boat,Motor Homes,School Bus,Low Rider
    Using Placement 1 :Hood , Celling , Door
    Using Placement 2 :Cockpit Floor, Tailgate, Firewall U Type Wall
    Using Placement 3 :Front Fender, Front and Back Wheels
    Using Placement 4 :Cargo,Trunk,Bonnet,Dashboard,Under Seat
    Using Placement 5 :Trunk Lid,Trunk Room,Engines
    Using Placement 6 :Underneath bonnets,Underfelt,Underlay
    Fitment Type :Direct Replacement
    Manufacturer Warranty :2 Years

    Payment

    1. It will be much appreciated that you finish your payment asap or it will make UPI(unpaid item case) on your account leading to be suspended or restricted by eBay when those UPI cases carry over to certain amount.

    2. Any problems please contact us for more details.

    Shipping

    We do appreciate your purchase here. If you are astisfied with the item as well as our service, please kindly leave us a Positive Feedback to help develop our business. Thank you in advance.

    Returns

    1. All items will be shipped to buyer's ebay address.

    2. All items will be shipped within 24 working hours upon receipt of payment, and multiple items will be combined shipping.

    3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.

    Contact Us

    1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your Ebay message as soon as possible, please kindly allow 24 hours for us to response.

    2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please contact us before leaving any 1 or 2 star ratings, negative feedback or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.

    . ]

    DESCRIPTION
    PAYMENT
    SHIPPING
    RETURN POLICY
    CONTACT US
    4Sheets 20MM Rubber Adhesive Pads Closed Cell Foam Sheet Neoprene Insulation pad

    Package Included:

    4sheets 12" X 12" Sponge Foam Sheet

     

    Item Description:

    Material: High Density Foam Cotton

    Item Length:30 CM = 12"
    Item Width:
    30 CM = 12"
    Item Thickness:2 CM =  20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size:4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)

    Reinforced / Crush Resistant: Yes
    Mildew & Mold Resistant: Yes
    Water resistant: Yes
    Non-toxic: Yes

     

    Features:

    ⭐【PRODUCT FEATURES】

    The closed-cell neoprene rubber roll is insulated, anti-slip, damp-proof, soundproof, buffering, corrosion-resistant, shock-absorbing, non-toxic, durable and environmentally friendly

     

    ⭐【Waterproof & Non-absorbent】
    Non-Absorbent, resistance to most oils, solvents, and fuels. Made odf EPDM sponge foam, this material is specifically made and designed to repel liquids and odors.     Perfect for high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【Temperature Range】
    The temperature range is from -30° to 195° F

     

    ⭐【Soft EVA Foam】
    Closed cell foam sheet is perfect for use as sound deadening in vehicles, and works well when used to dampen vibrations in recording studio monitors and subwoofer boxes.

     

    ⭐【Cushioning & Sealing】
    Closed foam padding is made of EPDM, this material is specifically made and designed to cushioning,sealing,shock absorption,sound insulation,sound reduction and noise reduction,which can be used in high traffic areas such as auto, garage, and kitchen areas.

     

    ⭐【STRONG ADHESIVE】
    The high-density rubber strip is covered with strong adhesive backing and it is non-degumming, so the rubber sheet can stick firmly for a long time and leave no residue when it is to be removed

     

    ⭐【Multipurpose】
    The DIY projects sheet is an all-around foam sheets padding and sealing tool that can be used on weather stripping doors, gaskets and pipes.  Can be applied to cabins, decks, cars, etc for anti-slip and waterproof use;can be applied to floors, furniture for protection,it can also be used for clothing, role playing and decorationIt.Is also easy to work with and can be conformed to any size and shape with the use of a pair of scissors or cutter, making it a great tool for cosplays,padding, props, costumes and craft tool.


    ⭐【EASY TO USE】
    Please clean and dry the flat surface you need to stick to before sticking. Cut the closed cell foam sheet into the size or shape you need, then peel off the release paper to stick.

     

    Notice:
    1.Our foam sheet has no chemical smell.Production process and sealed packaging inevitably produce some slight odor.This is a normal phenomenon.
    2.This smell will gradually disappear.Please rest assured that the material is no harm to your health.
    3.Before peeling off the back paper,you had better use a hair dryer to blow the foam pad for a while so that the it can be peeld off more easily.

    4.If you have any questions or concerns, please contact us using the EBAY messaging system.Thanks! 

    Item Specifics
    Brand :Modigt
    Type :Carpet Mat, Heat Sound Deadener Insulation Mat
    Material :High Density Foam Cotton
    Placement on Vehicle :Left, Right, Front, Rear
    Item Length :12 inch = 30 cm
    Item Width :12 inch = 30 cm
    Item Thickness :2 CM = 20 MM = 0.8 INCH = 787 MIL = 4/5"
    Size :4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)
    Attachment Type :Self-Adhesive
    Typical Temperature Stability :-30° to 195° F
    Features 1 :Insulated,anti-slip,Waterproof & Non-absorbent
    Features 2 :soundproof, buffering, corrosion-resistant,
    Features 3 :significantly reducing heat loss,shock-absorbing, non-toxic,
    Features 4 :Easy Installation,Easy to cut,durable
    Features 5 :Good tear and abrasion resistance
    Application 1 :Van,Truck, windows, furniture, electrical cabinets,
    Application 2 :doors, speakers, toys, sports equipment
    Application 3 :limousine,Camper,Boat,Motor Homes,School Bus,Low Rider
    Using Placement 1 :Hood , Celling , Door
    Using Placement 2 :Cockpit Floor, Tailgate, Firewall U Type Wall
    Using Placement 3 :Front Fender, Front and Back Wheels
    Using Placement 4 :Cargo,Trunk,Bonnet,Dashboard,Under Seat
    Using Placement 5 :Trunk Lid,Trunk Room,Engines
    Using Placement 6 :Underneath bonnets,Underfelt,Underlay
    Fitment Type :Direct Replacement
    Manufacturer Warranty :2 Years

    Payment

    1. It will be much appreciated that you finish your payment asap or it will make UPI(unpaid item case) on your account leading to be suspended or restricted by eBay when those UPI cases carry over to certain amount.

    2. Any problems please contact us for more details.

    Shipping

    We do appreciate your purchase here. If you are astisfied with the item as well as our service, please kindly leave us a Positive Feedback to help develop our business. Thank you in advance.

    Returns

    1. All items will be shipped to buyer's ebay address.

    2. All items will be shipped within 24 working hours upon receipt of payment, and multiple items will be combined shipping.

    3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.

    Contact Us

    1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your Ebay message as soon as possible, please kindly allow 24 hours for us to response.

    2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please contact us before leaving any 1 or 2 star ratings, negative feedback or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.

    . ]


    All right reserved.







    • UPC: Does not apply
    • Brand: Modigt
    • Type: Carpet Mat, Heat Sound Deadener Insulation Mat
    • Material: High Density Foam Cotton
    • Placement on Vehicle: Left, Right, Front, Rear
    • Item Length: 12 inch = 30 cm
    • Item Width: 12 inch = 30 cm
    • Item Thickness: 2 CM = 20 MM = 0.8 INCH = 787 MIL = 4/5"
    • Size: 4Sheets 12" x 12" (Total 0.36sqm/3.9sqft)
    • Attachment Type: Self-Adhesive
    • Typical Temperature Stability: -30° to 195° F
    • Features 1: Insulated,anti-slip,Waterproof & Non-absorbent
    • Features 2: soundproof, buffering, corrosion-resistant,
    • Features 3: significantly reducing heat loss,shock-absorbing, non-toxic,
    • Features 4: Easy Installation,Easy to cut,durable
    • Features 5: Good tear and abrasion resistance
    • Application 1: Van,Truck, windows, furniture, electrical cabinets,
    • Application 2: doors, speakers, toys, sports equipment
    • Application 3: limousine,Camper,Boat,Motor Homes,School Bus,Low Rider
    • Using Placement 1: Hood , Celling , Door
    • Using Placement 2: Cockpit Floor, Tailgate, Firewall U Type Wall
    • Using Placement 3: Front Fender, Front and Back Wheels
    • Using Placement 4: Cargo,Trunk,Bonnet,Dashboard,Under Seat
    • Using Placement 5: Trunk Lid,Trunk Room,Engines
    • Using Placement 6: Underneath bonnets,Underfelt,Underlay
    • Fitment Type: Direct Replacement
    • Manufacturer Warranty: 2 Years

     

    Processing Time

    • We process and ship orders Monday through Friday, excluding holidays.
    • Most orders are processed within 1–3 business days, depending on product availability.
    • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

    Shipping Coverage

    We currently ship to addresses within the United States only.

    Products may ship from:

    • Our U.S. warehouses, or
    • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

    Each product page clearly displays the “Ships From” location before checkout.


    Shipping Methods & Estimated Delivery

     

    Shipping Method Estimated Delivery Cost
    Free Shipping (US) 5–10 business days Free, available on eligible items
    Standard Shipping (US to US by Item) 5–10 business days $6.50 for the first item, $3.00 each additional
    Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
    Extended Delivery (Ships from Overseas Warehouse) 10–15 business days $14.50 for the first item, $4.00 each additional

    Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

    Free Shipping

    We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 


    Carriers

    We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.


    Import Duties & Taxes

    All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.


    Tracking & Notifications

    Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

    You can track your shipment anytime using the Track Your Order page on our website.


    Order Changes & Cancellations

    If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

    Contact: support@ibspot.com


    Item Not Received

    If your tracking number shows “Delivered” but you haven’t received your package:

    1. Check with your local USPS or UPS office.
    2. Confirm that the shipping address provided was correct.
    3. If the issue remains unresolved, contact support@ibspot.com for assistance.

    Damaged or Lost Parcels

    If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.


    Customer Support

    For any questions about shipping, tracking, or delivery, our customer support team is here to help.

    Email: support@ibspot.com

    We’re always happy to help.

    Please read our policy carefully before making a purchase.
    We aim to ensure every customer has a smooth and transparent experience with ibspot.com.


    Order Cancellation Policy

    Customers may request to cancel an order before it has been shipped.
    Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

    How to Request a Cancellation

    You can contact us through:

    Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.


    Return Policy

    We accept returns for most items within 30 days of delivery for a full refund.

    To be eligible for a return:

    • The item must be unused, in the same condition as received, and in its original packaging.

    • A tracking number must be provided to confirm the return shipment.

    Non-Returnable Items

    Certain products cannot be returned, including:

    • Perishable goods (for example, food, flowers, newspapers, magazines)

    • Intimate or sanitary goods

    • Hazardous materials or flammable liquids/gases

    • Gift cards

    • Downloadable software

    • Some health and personal care items

    Partial Refunds (If Applicable)

    Partial refunds may be granted in specific situations, such as:

    • Books with obvious signs of use

    • Opened CDs, DVDs, software, or vinyl records

    • Items not in their original condition, damaged, or missing parts not due to our error

    • Items returned more than 30 days after delivery


    How to Return an Item

    To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
    Our team will provide you with return instructions and a prepaid return label.


    Shipping Cost for Returns

    Please contact us before returning any item.
    We will provide a free return shipping label.

    If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

    For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
    We cannot guarantee that we will receive your returned item if shipped independently.


    Refund Processing

    Once your return is received and inspected:

    • In-store returns are refunded to the original form of payment or issued as a gift card.

    • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

    Please allow:

    • 5–7 business days for the return to reach our Returns Center.

    • An additional 3–10 business days for your bank to post the refund to your account.


    Damages, Issues & Claims

    Please inspect your order immediately upon receipt.
    If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
    We’ll evaluate the issue promptly and make it right.

    Product Claims

    Before purchasing, please review product details carefully.
    If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.


    Exchanges

    We do not process direct exchanges.
    The fastest way to get what you need is to return the original item and place a new order once your return is accepted.


    Return Address

    IBSPOT Return Center
    15 Sawmill Ln
    Dover Plains, NY 12522
    United States


    Customer Support

    Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

    Email: support@ibspot.com
    Contact Form: Contact Us page

    Oops!

    Sorry, it looks like some products are not available in selected quantity.

    OK

    Subscribe To Our Newsletter

    Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.